With Cotton Harvest, now truly under way most Cotton Farms Transporting agricultural machinery from one field to the next by way of public roads is a necessity form and very common in this area
There is an increase in traffic on Moonrocks Farm especially tractors trucks and Cotton Pickers
There has also been an increase in traffic on the public roads especially the back road
We STRONGLY encourage all staff NOT to use the back road but to use the main road as this road is marked with lines.
Please follow the link below as per the directions on our website
Some Common causes of accidents but not ALL causes
Difference in Speed
Most farm machinery is transported at speeds of 30 km/ph or slower while other vehicles often are traveling at much faster speeds. This difference causes motorists to miscalculate how fast they are approaching farm machinery. Motorists sometimes do not even see farm equipment because they are traveling too fast.
Motorists unfamiliar with slow moving agricultural machinery can make this a dangerous situation.
The potential for an accident is high.
Motorists may not slow down when approaching a slow-moving farm machine. Because of this accidents frequently occur between farm equipment and motorists traveling in the same direction.
Corners, hills, and other blind spots reduce a motorist’s ability to see farm equipment either traveling on the roadway or pulling onto a roadway. Dirty windshields on equipment also reduces operator visibility.
Improper Transport Techniques
Failure to securely tie down equipment on truck beds or transport trailers can cause equipment to slide off when going around a curve or when turning, especially when traveling at high speeds.
Towing Equipment Too Fast
The equipment may start to sway, causing the operator to lose control. Towing implements only with a chain can be extremely hazardous, especially if there is no means to provide tension other than applying brakes.
Size of the Machinery
Today’s large equipment sometimes overlaps into other lanes, creating a hazardous situation.
Some Prevention Tips of Road Collisions
- See and be seen - Clean off windshields and lights. Turn lights on at dusk or in times of poor visibility such as fog, rain, blowing dust, or cloudy conditions.
- Before entering the roadway, stop and look both directions.
- Make sure you have enough time to cross the road or enter the road if traffic is coming or is close
- Be aware of the road conditions. Know where the hazards exist before you start, such hazards include potholes, ditches, washouts, narrow bridges, blind corners, and sharp curves. Look out for road signs. Trying to avoid these may cause you to drive in the other lane. Be aware of traffic in both directions.
- Maintain speeds that are appropriate for the road conditions,
There is a strict speed limit of 30km for all vehicles on farm!